Mitus 206L
500W + 150W/16ohm - 129dB LF/133dB HF SPL - Precision coverage vertical array
Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206L maybe used also in outdoor applications where
the system is not directly exposed to the elements. The MITUS 206L passive version recommended amplifier of 500W rms LF and 150W rms HF.
-
2 x 6.5"(165 mm) B&C neodymium woofers with 1.7"(44 mm) coil
-
1.4"(36 mm) exit B&C neodymium driver with 2.5"(64 mm) coil
-
Frequency response from 75Hz to 20KHz
-
Internal HF protection
-
External digital processor required
-
Neutrik Speakon NL-4MDV connectors IN and LINK Out
-
100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
-
High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step
-
Wide range of hardware accessories for flying and ground stacked configurations
-
Very lightweight, only 13.5Kg
Specifications
|
|
Configuration way |
2 way
|
|
Recommended amplifier |
500W rms LF / 150W rms HF
|
|
Long term power |
250W LF / 70W HF
|
|
Short term power IEC 268-5 |
1000W LF / 300W HF
|
|
Nominal impedance |
16 ohm LF / HF
|
|
Frequency response |
75Hz ~ 20kHz @ -6dB
|
|
Low frequency woofer |
2 x 6.5 inch - 1.7 coil - neodymium
|
|
High frequency driver |
1 x 1.4 inch - 2.5 coil - neodymium
|
|
Sensitivity (@1W/1m) |
97 dB LF / 108 dB HF
|
|
Maximum SPL cont/peak |
125/129dB LF - 129/133 dB HF
|
|
Dispersion |
100°H x 10°V max dependant
upon n° of element
|
|
Crossover frequency |
1,200 Hz
|
|
Recommended HP filter |
65 Hz - 24 dB/oct
|
|
Recommended external filter |
Digital management with FBT presents
|
|
Input connectors |
2 x Speakon (NL4 in & throu)
|
|
Net dimensions (WxHxD) |
574 x 220 x 383 (mm)
|
|
Net weight |
13.5 kg
|
